Solid surface sink and trim bits with bearing
8/980.571-572
Trim a sink cut-out flush with the bowl in stages using these "over-hang" and flush trim bits. The Delrin® bearings are tapered to match the slope of the bowl's side. A first pass with the over-hang bit cleans the cut-out edge, leaving a slight over-hang on the underside of the counter. A second pass with the flush-trim bit completes the operation. Made from super micrograin carbide for guaranteed longer life!
Details
Ideal for use with all composite materials:
Variations
Filter
| Item Code | D | I | A | L | S |
|
|
|
|
|---|---|---|---|---|---|---|---|---|---|
|
880.571.11
|
19.05 | 25.4 | 78 | 12.7 | 990.058.00 | 991.057.00 | 791.046.00 | ||
|
980.571.11
|
19.05 | 25.4 | 78 | 12 | 990.058.00 | 991.057.00 | 791.046.00 | ||
|
980.572.11
|
22 | 25.4 | 10 | 78 | 12 | 990.058.00 | 991.057.00 | 791.048.00 | |
|
880.572.11
|
22 | 25.4 | 10 | 78 | 12.7 | 990.058.00 | 991.057.00 | 791.048.00 |