Create slots, grooves and rabbets in materials from 3,2mm to 18mm in depth by using the adjustable CMT Three Wing slot cutter set.
See chart below for details on spacing and correct cutter combinations. Ideal for biscuit joints and milling perfect tongue and groove joints.
This set includes:
- 4 carbide tipped cutters 3,2mm, 4mm, 4,8mm, 6,4mm
- 1 arbor 12mm or 12,7mm
- 1 ball bearing (22mm) for 12,7mm cut
- 17 shims: (8x0,1mm - 4x0,5mm - 3x1mm and 2x4mm)
Safety tips: never use the slot cutter set without shims between the cutters.
The distance between the cutters can vary from 1mm to 1,7mm.
A shim must also be positioned between the ball bearing and the cutters.
Shop tips: the 791.711.00 bearings kit allows for 6,35 (1/4") and 9,5mm (3/8") cutting depth.
Notice:
The carbide edges of the cutters should never touch; arrange the shims as illustrated below.
Use only the thicknesses provided in the set. Be sure all cutters are assembled in the proper right rotational direction below.
Looking down the arbor the cutters will turn clockwise.
Watch the V-LOG video 8/900.506
