![[0, ]](/media/userfiles/images/warning%20triangolo%2060px.png)
Solid surface rounding over bowl router bits
8/980.541-8/966.6
These bits roundover and trim the countertop edges after the bowl is mounted. Can be used with the CMT 880.551.11 bevel cutter for a flush cut-out between the countertop and installed undermount bowl. For use on hand-held portable routers. Features a non-marring Delrin® bearing to protect the finished edges. Special angled Delrin® sleeve on the bearing of the CMT bevel cutter lets you work without leaving marks on the workpiece. Trims and shapes all wood and wood materials. Perfect for kitchen and bathroom counter top work.
Application
Ideal for use with all composite materials:
Variations
Filter
| Item Code | A | D | T | I | R | L | S |
|
|
|
|
|---|---|---|---|---|---|---|---|---|---|---|---|
|
866.601.11
|
15° | 2'' | 3/4'' | 1'' | 1/2'' | 2-61/64'' | 16mm | 990.058.00 | 991.057.00 | 791.041.00 | |
|
866.602.11
|
15° | 2'' | 1'' | 1-1/4'' | 1/2'' | 3-13/64'' | 16mm | 990.058.00 | 991.057.00 | 791.041.00 | |
|
880.541.11
|
18° | 2-1/8'' | 3/4'' | 1'' | 1/2'' | 3-5/64'' | 16mm | 990.058.00 | 991.057.00 | 791.041.00 |