Home Home Home Home Home Home Home Home

WARNING : Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer; Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
WARNING: This product can expose you to chemicals including nickel and lead, which are known to the State of California to cause cancer and lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

[0, ] California Proposition 65

552-7 Diamond dry hole saws

552-7

Diamond grit edge hole saws have been specifically developed for professionals that need to drill extremely hard materials where it is increasingly difficult to drill with conventional hole saws.
These hole saws guarantee excellent performance and superior lifetime.

Also available as a 6-piece set 552-701-06, which contains:
  • 552-705  Ø 5mm (3/16")
  • 552-706   Ø 6mm (1/4")
  • 552-708   Ø 8mm (5/16")
  • 552-712   Ø 12mm (1/2")
  • 552-GUIDE
  • 552-EX16 - Hexagonal adapter for electric drill
Details
Recommendations for use:

Turn on the drilling machine to start tool rotation. Begin drilling approximately at a 30° angle – this is the angle measured between the hole saw and the working surface. Cutting at an angle will prevent tool slippage, allow for perfect centering and increase cutting precision.
To gain improved stability through the drilling process, it is advised to rest the drilling machine on the working surface.

 
Continue the cut vertically, accompanying the tool in an orbital motion. This will favor better cooling and chip evacuation.  (If you are using a guide, begin the cut vertically, then lift the guide and continue cutting in an orbital motion).
 
Remember that the tool you are using is not a drill bit. This means that attempting to bore holes perfectly perpendicular to the work surface on a frequent basis will drastically reduce the life of your hole saw.

 
Using water as a cooling agent may help extend the life of the hole saw.
 
The percussion/hammer action mode must be turned off when using these hole saws.
Variations
Filter
Item Code D I L S MAX RPM QTY
552-705
552-705 3/16'' 1-3/8'' 2-3/8'' 5/8'' - 11UNC 14000 10
552-706
552-706 1/4'' 1-3/8'' 2-3/8'' 5/8'' - 11UNC 14000 10
552-708
552-708 5/16'' 1-3/8'' 2-3/8'' 5/8'' - 11UNC 14000 10
552-710
552-710 3/8'' 1-3/8'' 2-3/8'' 5/8'' - 11UNC 14000 10
552-712
552-712 1/2'' 1-3/8'' 2-3/8'' 5/8'' - 11UNC 14000 10
552-716
552-716 5/8'' 1-3/8'' 2-3/8'' 5/8'' - 11UNC 14000 5
552-719
552-719 3/4'' 1-9/16'' 2-3/8'' 5/8'' - 11UNC 14000 5
552-725
552-725 1'' 1-9/16'' 2-3/8'' 5/8'' - 11UNC 14000 5
552-732
552-732 1-1/4'' 1-9/16'' 2-3/8'' 5/8'' - 11UNC 14000 5
552-735
552-735 1-3/8'' 1-9/16'' 2-3/8'' 5/8'' - 11UNC 14000 5
552-738
552-738 1-1/2'' 1-9/16'' 2-3/8'' 5/8'' - 11UNC 14000 5
552-751
552-751 2'' 1-9/16'' 2-3/8'' 5/8'' - 11UNC 14000 5
552-754
552-754 2-1/8'' 1-9/16'' 2-3/8'' 5/8'' - 11UNC 14000 5
552-789
552-789 3-1/2'' 1-9/16'' 2-3/8'' 5/8'' - 11UNC 14000 5
552-701-06
552-701-06 3/16''-1/4''-5/16''-1/2'' 1-3/8'' 2-3/8'' 5/8'' 1500 - 4000 5