WARNING : Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer; Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
WARNING: This product can expose you to chemicals including nickel, cobalt and lead, which are known to the State of California to cause cancer and lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
![[0, ]](/img/warning.png)
California Proposition 65
Ovolo router bits
7/8/927
CMT put the work capacity of several different bits all into one.
The perfect bit for furniture makers, the CMT ovolo allows you to make beautiful beadwork, edgework and veins.
Use these bits on automated router systems or with a fence to produce a wide variety of single and double bead profiles and roundovers like those illustrated below by simply adjusting the height or depth of the cut.
The perfect bit for furniture makers, the CMT ovolo allows you to make beautiful beadwork, edgework and veins.
Use these bits on automated router systems or with a fence to produce a wide variety of single and double bead profiles and roundovers like those illustrated below by simply adjusting the height or depth of the cut.
Details
Safety tips:
pay particular attention to never rush the job when using a large profile bit.
Mill pieces with a fence mounted on the work table to ensure maximum protection.
pay particular attention to never rush the job when using a large profile bit.
Mill pieces with a fence mounted on the work table to ensure maximum protection.
Variations
Filter
| Item Code | R | D | I | L | S | Z | MAT | RH-LH | |
|---|---|---|---|---|---|---|---|---|---|
|
827.050.11
|
3/16 | 13/16 | 15/32 | 1-23/32 | 1/4 | 2 | HW | RH | |
|
827.060.11
|
15/64 | 29/32 | 15/32 | 1-23/32 | 1/4 | 2 | HW | RH | |
|
827.560.11
|
15/64 | 29/32 | 15/32 | 1-31/32 | 1/2 | 2 | HW | RH | |
|
827.595.11
|
3/8 | 1-1/4 | 5/8 | 2-1/8 | 1/2 | 2 | HW | RH | |
|
827.095.11
|
3/8 | 1-1/4 | 5/8 | 1-7/8 | 1/4 | 2 | HW | RH | |
|
827.127.11
|
1/2 | 1-1/2 | 3/4 | 2 | 1/4 | 2 | HW | RH | |
|
827.627.11
|
1/2 | 1-1/2 | 3/4 | 2-1/4 | 1/2 | 2 | HW | RH | |
|
827.660.11
|
5/8 | 1-3/4 | 7/8 | 2-3/8 | 1/2 | 2 | HW | RH | |
|
827.690.11
|
3/4 | 2 | 1 | 2-1/2 | 1/2 | 2 | HW | RH | |
|
827.722.11
|
7/8 | 2-1/4 | 1-1/8 | 2-5/8 | 1/2 | 2 | HW | RH | |
|
827.754.11
|
1 | 2-1/2 | 1-5/16 | 2-13/16 | 1/2 | 2 | HW | RH |